How To Download And Install Android 4.0.4 ICS On Galaxy Nexus (Tutorial)

April 8, 2012 by: Haseeb Maan 3

As you may have already gathered, the newest iteration of Android (4.0.4) has begun trickling out to the international version of Samsung’s Galaxy Nexus and Nexus S devices, among others.

I say trickling, because several users have however to receive the OTA update notification on their device. No need to panic, however, since there’s a fast and simple manner for you to hop from version 4.0.2 to 4.0.4 during a few simple steps – details of which might be found below.

DISCLAIMER: Redmond Pie won’t be held accountable if you lose information or your device gets damaged within the following of this guide. Proceed at your own risk.

Before you’ll be able to begin, you’ll need to check your device’s codename to confirm it is compatible with this specific update. Your device completely should be the GSM version (not the Verizon Galaxy Nexus) with the product code name ‘yakju’.

If your device has the name ‘yakjuxw’, ‘yakjusc’ or the other such name, then don’t proceed, as you risk messing your device up. In order to ascertain that device you’re using, grab the GN Official Update Checker from the Google Play Store.

You also should be running stock Android 4.0.2 (ICL53F) as opposed to a custom ROM, and you’ll in fact need Android SDK installed.

With the formalities behind us, let’s begin.

Step 1: Download fastboot for Windows or Mac

Step 2: Unlock your bootloader. If you are unsure how to, then investigate this post.

Step 3: Download the Android 4.0.4 update from Google from here, and therefore the latest ClockworkMod recovery image from here.

Step 4: Copy the 1st file you downloaded in Step three to the /sdcard folder on your Galaxy Nexus

Step 5: Boot your device up into bootloader mode.
This can be achieved by powering off your device, and then powering back on while holding the quantity up and down buttons along, followed by pressing the ability button.

Step 6: Connect your device to your laptop, and open a command prompt or terminal. Find} your fastboot folder, making certain your ClockworkMod image is also within that very same folder.

Step 7: Type: fastboot-windows.exe boot recovery-clockwork-5.5.0.2-maguro.img within the command line.

Step 8: Utilizing the ClockWorkMod recovery menu choice to flash a zipper file from the SD card, choose your OTA .zip.